Professional Heat Pump Repair Service in Port Hope

Frequently Asked Questions about Heat Pump Repairs

• How much does a technician service call cost in Port Hope?
  The fee for a technician service call is 149$, which is our minimum charge. This fee includes the technician’s assessment of the issue. If you decide to proceed with repairs, this fee is rolled into the total cost. For instance, if the repair estimate is $200, you’ll pay $200 after the repair, covering both the service call and repair costs.
• How much does it cost to fix a refrigerant leak in a heat pump?
  The cost to fix a refrigerant leak and a heat pump depends largely on the cause of the leak. Replacing an evaporator coil costs around $1,500, while repairing a simple leak may cost you around $200.
• How do I reset my heat pump?
  Turn off the power switches, which can be on the wall nearby or on the pump itself. Then turn off the electrical breakers. After everything is off, wait up to five minutes, and the heat pump should be reset.
• Why is my heat pump not working in extreme cold weather?
  If your heat pump isn’t working well, check to see if the outdoor unit is frozen over. If the temperature is too low, ice may have gathered on the device. This obstructs airflow and prevents heat absorption. Usually, heat pumps have defrosters which help alleviate this problem.
• What does a bad heat pump compressor sound like?
  Gurgles point to low refrigerant levels, which can severely affect performance. A precursor to shrieking, grinding noises indicate dirty components or the need for lubrication. Unbearably loud shrieking noises usually indicate a faulty compressor under high pressure. Shut down your system immediately.
• Why is my heat pump not kicking on?
  Some common causes of heat pump failure include issues with the thermostat, power supply, refrigerant levels, and outdoor coil. Each of these issues may have its own underlying causes that will need to be addressed in order to fix the problem permanently.
• Can I repair my own Heat Pump?
  Heat Pumps are on a 240 volt circuit. Severe shock or electrocution is possible without a thorough understanding of electricity. Also, Cooling systems today are more complicated to service than ever before, now being comprised of solid state circuit boards and sensors. They usually require expert attention in order to comply with federal regulations, such as the Clean Air Act which prohibits releasing refrigerants into the atmosphere. An certified heat pump contractor or service technician should be called at the first sign of trouble.