Navien NPE-210A2 Tankless Water HeaterNavien NPE-240S2 Tankless Water Heater 199,000 BTU/h
In Stock
Custom Pricing Available
+ Turnkey installation *
Order nowInstallation/replacement covers all necessary materials for operation
A few steps and a new Navien NPE-240S2 Water Heater in your house
Technical Characteristics of Navien NPE-240S2 Tankless Water Heater
- Item
- NPE-240S2
- Heat Capacity (input)
- Natural gas
- Propane
- 13,300 – 199,900 BTU/h
- 13,300 – 199,900 BTU/h
- Efficiency ratings
- UEF (NG & LP)
- 0.96
- Flow rate (DHW)
- 19°C temp rise
- 25°C temp rise
- 37°C temp rise
- 42.4 l/m (11.2 GPM)
- 32.9 l/m (8.7 GPM)
- 22 l/m (5.8 GPM)
- Dimensions
- 43.9cm W x 69.6cm H x 33.5cm D (17.3″ W x 27.4″ H x 13.2″ D)
- Boiler weight
- 33.1 kg (73 lbs)
- Installation type
- Indoor or outdoor wall-hung
- Max Vent Length
- m (0 ft)
- Ignition
- Electronic ignition
- Water pressure
- 1.055-10.545 kg/cm2 (15-150 PSI)
- Natural gas supply pressure (from source)
- 3.5 ” WC to 10.5 ” WC
- Propane gas supply pressure (from source)
- 8 ” WC to 13 ” WC
- Natural gas manifold pressure (min-max)
- -0.03 ” WC to -0.96 ” WC
- Propane gas manifold pressure (min-max)
- -0.02 ” WC to -0.96 ” WC
- Minimum flow rate
- 1.893 l/m (0.5 GPM)
- Connection sizes
- Cold water inlet
- Hot water outlet size
- Gas inlet
- 3/4″ NPT
- 3/4″ NPT
- 3/4″ NPT
- Power supply
- Main supply
- Maximum power consumption
- 120V AC, 60 Hz
- 200 W (max 2 A), 350 W (max 4 A) with external pump connected
- Materials
- Casing
- Heat exchangers
- Cold rolled carbon steel
- Primary heat exchanger: stainless steel Secondary heat exchanger: stainless steel
- Venting
- Exhaust
- Intake
- Vent clearances
- 2″ or 3″ PVC, CPVC, approved polypropylene and stainless steel 2″ or 3″ special gas vent type BH (Class II, A /B/C)
- 2″ or 3″ PVC, CPVC, approved polypropylene and stainless steel 2″ or 3″ special gas vent type BH (Class II, A /B/C)
- 0″ to combustibles
- High elevations
- 10,100 feet for both NG or LP gas. Please refer to Installation Manual for additional details and instructions.
- Safety Devices
- Flame rod, APS, ignition operation detector, water temperature high limit switch, exhaust temperature high limit sensor, power surge fuse, burner high limit fuse, vent installation detector (VID)

Get a Free Consultation on Equipment Selection
Our skilled team helps you find the most appropriate and budget-friendly equipment
or just call us(866) 545-6460
Navien NPE-240S2 Tankless Water Heater Manual
Popular requests
Similar products
Thank You.
We will contact you. Shortly.
We’re sorry
Something went wrong.













Tankless Water Heater Navien NPE-240S2 Reviews
- Jason Williams September 1, 2026
(0 reply) - Caroline Mitchell March 29, 2025
(0 reply) - Thomas Richardson January 18, 2025
(0 reply) - Rachel Baker February 12, 2024
(0 reply)
4 of 4 ReviewsThe Navien NPE-240S2 has exceeded our expectations. We replaced an aging traditional water heater and immediately noticed improved performance and more hot water available throughout the house. The system heats water quickly, runs efficiently, and takes up very little space. We especially like that it only heats water when needed, rather than constantly storing and reheating a large tank. The build quality feels excellent, and after going through a full winter season, it has been completely reliable. A great investment for anyone looking for a high-performance tankless water heater.
After months of researching tankless water heaters, we decided on the Navien NPE-240S2, and it has been one of the best upgrades we have made to our home. Our previous water heater was constantly struggling during busy mornings. With two teenagers, laundry, dishes, and multiple showers happening around the same time, we were regularly running out of hot water. The new installation made an immediate impact on our everyday comfort. The unit provides a steady supply of hot water without temperature fluctuations, and its performance has been excellent even in cold Canadian weather. We chose this model for its high efficiency, high capacity, and reliable design. The 0.96 UEF rating, condensing technology, and dual stainless steel heat exchangers gave us confidence that this would be a long-term investment rather than just another replacement. Another feature we really appreciate is the EZNav control panel. It makes adjusting settings simple and convenient, even for non-experts. The unit itself is surprisingly compact compared to our old tank and looks much cleaner installed on the wall. The hot water is reliable, the operation is quiet, and our daily routine is much easier now. This was definitely the right choice for our family.
Upgrading to the Navien NPE-240S2 was a huge improvement for our home. Our old tank water heater was taking up valuable space and couldn’t keep up with multiple people needing hot water at the same time. This tankless system solved those problems immediately. The hot water supply is consistent, the unit operates quietly, and we no longer have to wait for the tank to recover between uses. The new system gave us back valuable space that was previously occupied by older equipment. Very impressed with the quality and reliability of this Navien water heater.
Excellent value for money. This water heater has been a real lifesaver for our family.